LZX TBC offers itself as a one frame delay.

nickciontea · Post by **nickciontea** » Fri Sep 13, 2013 2:22 am

[video][/video][video][/video]

CVE to TBC, luma to CV on crossfade en route to Hue on CSM, blue channel to Saturation on CSM. triple summing amp to CVE.

audio bands to Ycsm, triple summing amp, and 2 VWGs

revmutt · Post by **revmutt** » Fri Sep 13, 2013 6:33 am

Nice stuff Nick.

DoctorDoolittle · Post by **DoctorDoolittle** » Fri Sep 13, 2013 3:00 pm

the possibilities are endless

kurtbach · Post by **kurtbach** » Tue Sep 17, 2013 7:33 pm

can't wait to get one of those TBC's that second video is off chops

Eli · Post by **Eli** » Tue Sep 17, 2013 9:35 pm

Excellent vids Nick! Looking forward to TBC-Time...

BRIZ · Post by **BRIZ** » Sun Sep 22, 2013 11:21 pm

nick - sexellent work.
how do you get the mirror image on the Chandeliers - Bamboo vid?
is it done post production? really wish to be able to do this live.

nickciontea · Post by **nickciontea** » Mon Sep 23, 2013 3:02 pm

you can do this live with a few different devices.. My roland V4 does it.. But I think I remember someone having a security camera multiplexer that possibly did this as well. But technically still LZX post processing

as for within the synth. I think we wait for the Frame buffer.. which will mirror ON CV!! and so many other things

revmutt · Post by **revmutt** » Mon Sep 23, 2013 8:56 pm

nickciontea wrote:you can do this live with a few different devices.. My roland V4 does it.. But I think I remember someone having a security camera multiplexer that possibly did this as well. But technically still LZX post processing

as for within the synth. I think we wait for the Frame buffer.. which will mirror ON CV!! and so many other things

You should be able to do this with a multiplexer IF you can get rid of the text that usually accompanies each feed.

starpause · Post by **starpause** » Thu Oct 24, 2013 4:09 pm

Super cool stuff, I got my TBC installed last night but it's too deep for my enclave 12u rack, gahhh! Eyeing goike biz now. Anyway!

TBC question... I've got 2 security cameras like this

VideoSecu Bullet
VideoSecu Dome

Going into the VSG the cameras take up the full frame. However, plugging either camera into the TBC provides an image that doesn't fill the full frame, it's got nothing on the left of the screen (maybe an 1/8th or 1/16th of the screen is blank).

Any ideas on what's going on there? Thanks!

jay_el · Post by **jay_el** » Fri Nov 15, 2013 8:47 pm

When I feed an composite image through the TBC it subsequently doesn't fill the frame on the monitor when output from the CVE. The image appears off center with a narrow strip being blank on the left hand side of the monitor.

(This same question was brought up in the "LZX TBC offers itself as a one frame delay" thread by starpause but as it wasn't the subject of the thread it may have been overlooked).

The same source through the VSG works fine. I do have the module attached to the sync cable. I don't currently have a s-video source to test.

Can anyone offer any other suggestions? Thanks.

MOD WIGGLER

MOD WIGGLER

LZX TBC offers itself as a one frame delay.

LZX TBC offers itself as a one frame delay.

tbc question