E340/E350 DIY kits available for immediate shipment

paults · Post by **paults** » Thu Aug 18, 2011 1:09 pm

I have finished making up the E340 and E350 kits. Those who have placed orders will see 'happy emails' by tomorrow.

I have 2ea E340 kits and 3 E350 kits not spoken for.

They are $250 US, $275 foreign. They DO NOT include faceplate, pots, jacks or knobs. That's the DIY part. Free shipping.

Please email me at synth1@airmail.net if interested.

guitarfool · Post by **guitarfool** » Thu Aug 18, 2011 6:03 pm

paults · Post by **paults** » Thu Aug 18, 2011 6:35 pm

As of this instant 1 E340 and 1 E350 kit left.

patchdub · Post by **patchdub** » Thu Aug 18, 2011 6:40 pm

no monies now. will you be doing this again in the near future?

wmonk · Post by **wmonk** » Thu Aug 18, 2011 6:46 pm

emailed for a e350

paults · Post by **paults** » Thu Aug 18, 2011 7:36 pm

a) all kits sold, thanks

b) I wil have more in about 6 weeks. I am making another 200 of these modules, buying parts this weekend. Takes ~ 2 weeks for parts to arrive, 3-4 weeks for the assembler to SMT place & solder, 1 week for me to organize them.

I usually set 10ea aside from the 200 sets for the DIYers, rest are made into full modules.

The E340s took longer this first time, I had work/family issues and moved, got laid-off from RIM but hired yesterday by TI. What a world......

pugix · Post by **pugix** » Sun Aug 21, 2011 5:53 pm

My E430 kit came yesterday and I built it today.

I made one wiring mistake, reversing the top and center wires on the CHAOS pot. Before I figured it out and fixed it, the module seemed a little more chaotic than I expected, especially since turning the pot all the way down resulted in little else but noise from the output.

Haven't had enough time to put up a post on pugix.com. Will do it soon.

essex sound lab · Post by **essex sound lab** » Sun Aug 21, 2011 11:38 pm

pugix wrote:My E430 kit came yesterday and I built it today.

Richard, do you have a 5U panel design for the E340? Sorry if I missed it.

Gordon

pugix · Post by **pugix** » Mon Aug 22, 2011 5:58 pm

The FPE panel I used for the E340 is similar to the one for the E350.

http://pugix.com/synth/synthesis-techno ... terrarium/

Same 1U layout, but instead of the second toggle switch I have an attenuator pot for the Spread CV input.

The build was almost identical to the E350. I made my own bracket this time and used different pots. This time I used #24 stranded for the panel wiring, which is just physically easier than #22, because of the cramped space.

wmonk · Post by **wmonk** » Thu Aug 25, 2011 11:04 am

Arrived today in the Netherlands.

Thanks for the great and fast service Paul!

synthetic · Post by **synthetic** » Sun Sep 18, 2011 6:03 pm

pugix wrote:http://pugix.com/synth/synthesis-techno ... terrarium/

Is that a four-pin power supply? I thought it would be a MOTM six-pin jack (in addition to Euro ribbon).

sduck · Post by **sduck** » Sun Sep 18, 2011 8:50 pm

It comes with both a standard motm 4 pin and a euro connection.

davebr · Post by **davebr** » Fri Dec 02, 2011 1:37 am

I've finished both my E340 and E350 in 5U format. I've put photos for each on their own page.

5U E340 Cloud Generator

5U E350 Morphing Terrarium

Dave

JohnLRice · Post by **JohnLRice** » Fri Dec 02, 2011 2:02 am

davebr wrote:I've finished both my E340 and E350 in 5U format. I've put photos for each on their own page.

5U E340 Cloud Generator

5U E350 Morphing Terrarium

Dave

Great job, Dave!

Funky40 · Post by **Funky40** » Fri Dec 02, 2011 6:26 am

paults wrote:I have finished making up the E340 and E350 kits. Those who have placed orders will see 'happy emails' by tomorrow.

I have 2ea E340 kits and 3 E350 kits not spoken for.

They are $250 US, $275 foreign. They DO NOT include faceplate, pots, jacks or knobs. That's the DIY part. Free shipping.

Please email me at synth1@airmail.net if interested.

do you have E350 Kits in stock Paul ? or when +-

simfonik · Post by **simfonik** » Fri Dec 02, 2011 11:22 am

davebr wrote:I've finished both my E340 and E350 in 5U format. I've put photos for each on their own page.

5U E340 Cloud Generator

5U E350 Morphing Terrarium

Dave

very nice!

SepticUnderground · Post by **SepticUnderground** » Fri Dec 02, 2011 1:45 pm

davebr wrote:I've finished both my E340 and E350 in 5U format. I've put photos for each on their own page.

5U E340 Cloud Generator

5U E350 Morphing Terrarium

Dave

Wow magnificent looks!

elsound77 · Post by **elsound77** » Thu Dec 29, 2011 5:33 pm

Funky40 wrote:
paults wrote:I have finished making up the E340 and E350 kits. Those who have placed orders will see 'happy emails' by tomorrow.

I have 2ea E340 kits and 3 E350 kits not spoken for.

They are $250 US, $275 foreign. They DO NOT include faceplate, pots, jacks or knobs. That's the DIY part. Free shipping.

Please email me at synth1@airmail.net if interested.
do you have E350 Kits in stock Paul ? or when +-

i m interested for a E 350 5u with attenuators 8_)

decaying.sine · Post by **decaying.sine** » Thu Dec 29, 2011 10:58 pm

elsound77 wrote:
Funky40 wrote:
paults wrote:I have finished making up the E340 and E350 kits. Those who have placed orders will see 'happy emails' by tomorrow.

I have 2ea E340 kits and 3 E350 kits not spoken for.

They are $250 US, $275 foreign. They DO NOT include faceplate, pots, jacks or knobs. That's the DIY part. Free shipping.

Please email me at synth1@airmail.net if interested.
do you have E350 Kits in stock Paul ? or when +-
i m interested for a E 350 5u with attenuators 8_)

You'll have to DIY that! There is also an expander panel for euro.

paults · Post by **paults** » Fri Dec 30, 2011 2:41 pm

Maybe I should propose that if I can get 30 people to pay $100 deposit, I could run these as 'real' products and not DIY.

PM if you are up for it (DO NOT SEND $$$ just ping me).

decaying.sine · Post by **decaying.sine** » Fri Dec 30, 2011 6:50 pm

You mean the attenuators and jumper to front panel, Paul?

davebr · Post by **davebr** » Fri Feb 03, 2012 2:44 am

I decided I needed a laser for my Morphing Terrarium. I have my first pass prototype working but I still need to make a few mechanical tweaks.

I put some photos and a video on my laser page.

Dave

jenamu6 · Post by **jenamu6** » Fri Feb 03, 2012 2:49 am

Wow......what laser is that?

How much....where did you buy......I want.

Cat-A-Tonic · Post by **Cat-A-Tonic** » Fri Feb 03, 2012 2:54 am

davebr wrote: I put some photos and a video on my

That looks awesome.
If the video frame was centered it would be even better.

Lazers have no way of doing a Z input, do they?
...as in vector scanning I mean.

jenamu6 · Post by **jenamu6** » Fri Feb 03, 2012 2:57 am

jenamu6 wrote:Wow......what laser is that?

How much....where did you buy......I want.

Oops clicked the link and found my answers.....too difficult for me.

Are there any ready to use and not costing a fortune solutions?

MOD WIGGLER

MOD WIGGLER

E340/E350 DIY kits available for immediate shipment

E340/E350 DIY kits available for immediate shipment

E340 and E350

Re: E340 and E350

Re: E340/E350 DIY kits available for immediate shipment

Re: E340 and E350

Re: E340 and E350

Re: E340/E350 DIY kits available for immediate shipment

Re: E340/E350 DIY kits available for immediate shipment

Laser Display

Re: Laser Display