Advice for a Module in a DRM Setup

Modular and other sound devices from BugBrand.

Moderators: Kent, BugBrand

Post Reply
User avatar
rowsbywoof
Ultra Wiggler
Posts: 992
Joined: Tue Mar 29, 2016 9:20 pm
Location: Los Angeles
Contact:

Advice for a Module in a DRM Setup

Post by rowsbywoof »

Hey all, quick question... I want to move my DRMs and a few effects into a single 2X case (will reach out soon, Tom) and have the following things I'm looking to install:

Row1: DRM1-X | BLANK | DRM1-X
Row2: DRM2 | CrossOver Filter | PTDelay

So, what would folks recommend as a useful module to stick in that 1U of space? I know I could just slot a blank panel in there, but that feels like a waste, and I know there's are a ton of little single slot modules that might make sense in this case... but I'm not very well versed in the modular world and while they all sound cool, I don't know what's really useful or would make the most sense here. Any advice on some modules? What would you slot in there and why?

Thanks, all!
User avatar
rowsbywoof
Ultra Wiggler
Posts: 992
Joined: Tue Mar 29, 2016 9:20 pm
Location: Los Angeles
Contact:

Re: Advice for a Module in a DRM Setup

Post by rowsbywoof »

Oh crap, it looks like I'm repeating a pretty recent thread: viewtopic.php?f=29&t=236217

OK, digging through that first. Should have looked before posting :(

Edit: looks like Diode Director seems like a good choice. I can see that being very useful for routing signals around to the different modules for some fun results. Sorry for the excess spam. Should have read down a few threads before making this :doh:
Post Reply

Return to “BugBrand Devices”