Animal Factory Amplification

New Hosted Sub-Forum. Check it out here:
Not exactly a new manufacturer but new to us. Check out their pedal and eurorack product and extend them a welcome all the way to Mumbai!

HI-Fusion VCF by FEEDBACK [Build UPDATE]

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, Joe., luketeaford, Kent, Joe., luketeaford

Post Reply
User avatar
strat-1
Veteran Wiggler
Posts: 652
Joined: Wed Jun 03, 2015 8:58 am
Location: Romania
Contact:

HI-Fusion VCF by FEEDBACK [Build UPDATE]

Post by strat-1 »

UPDATE : We uploaded all the files needed for the build of HI-Fusion

www.feedbackmodules.com

ImageImage
Image

HI-FUSION is a remake of the classic Polyfusion from the 70s with some improvements.
It is a low pass OTA VCF based on the well known LM13700 ic.
We chose to make this circuit because it's v/oct stable, and the trimmers allow to calibrate it properly.
It has a switch for 2 pole and 4 pole configuration, each with it's own character and timbre.
This design produces nice sounding filter fm results.

For the audio demos we used two oscillators slightly detuned as the sound source.


Output with switch in 4Pole position.

https://soundcloud.com/strat1/hi-fusion-4pole

Output with switch in 2Pole position.

https://soundcloud.com/strat1/hi-fusion-2pole

VCO inserted in FREQ CV input.

https://soundcloud.com/strat1/hi-fusion-fm-modulation

LPfet through VCA. ADSR to VCA and another ADSR for LPfet.

https://soundcloud.com/strat1/hi-fusion-adsr-modulation

There are 2 type of kits available :

KIT1 : 20EUR (2PCBs+FrontPanel)
KIT2 : 35EUR (Pcbs+FP, 4x2N5457, 5xminijacks, 1x50KA POT, 3X50KB POTS, 2xboard connectors, 4xCream Knobs)

COMPLETE MODULE : 90eur

KIT1 :

Image

KIT2 :

Image
Attachments
HI-Fusion VCF Build Photos 1.0.zip
(4.34 MiB) Downloaded 45 times
HI-Fusion VCF Build Files 1.0.zip
(15.59 MiB) Downloaded 65 times
Last edited by strat-1 on Tue Jan 01, 2019 1:46 pm, edited 3 times in total.
User avatar
tobb
Super Deluxe Wiggler
Posts: 1084
Joined: Sat Nov 26, 2011 5:41 am

Post by tobb »

sounds good :tu:
User avatar
strat-1
Veteran Wiggler
Posts: 652
Joined: Wed Jun 03, 2015 8:58 am
Location: Romania
Contact:

Post by strat-1 »

UPDATE : We uploaded all the files needed for the build of HI-Fusion VCF
1Dj4P's
Learning to Wiggle
Posts: 10
Joined: Thu Feb 04, 2021 4:13 am

Re: HI-Fusion VCF by FEEDBACK [Build UPDATE]

Post by 1Dj4P's »

Hi,
Could I use J109 in place of the 4x 2N5457 ?
Thanks
Post Reply

Return to “Music Tech DIY”