xvive group buy fo vactrols

Sin_Phi · Post by **Sin_Phi** » Mon Mar 28, 2016 2:06 pm

I would be in for 10 5C1

jhulk · Post by **jhulk** » Mon Mar 28, 2016 5:07 pm

the 500 quantities is the minimum order value

so wont be able to order until we have at least that amount

the next price break is 1000

i will order 100 of each just for my stock

so we need at least 400 of each type from all others who want them

and wont be putting an order in until the amounts are reached

horstronic · Post by **horstronic** » Mon Mar 28, 2016 5:37 pm

I'd be in for at least
10x 5C3
10x 5C3/2

J3RK · Post by **J3RK** » Tue Mar 29, 2016 11:18 am

jhulk wrote:the 500 quantities is the minimum order value

so wont be able to order until we have at least that amount

the next price break is 1000

i will order 100 of each just for my stock

so we need at least 400 of each type from all others who want them

and wont be putting an order in until the amounts are reached

Changed my 5C1 request to 50.

ttown23 · Post by **ttown23** » Tue Mar 29, 2016 2:46 pm

I'll take 100 C3 and 100 C3/2

jhulk · Post by **jhulk** » Tue Mar 29, 2016 2:51 pm

ok as seeing there is a lot of usa buyers i will need a usa postage collector other wise if they get sent to uk i will get hit for vat

i will talk to the xvive rep to see if this can be done i will email her on wednesday

jhulk · Post by **jhulk** » Wed Mar 30, 2016 5:24 am

ok i have talked to the rep this morning and i can have a member as a representative

in USA
Australia
ill do the UK
and Europe

and i can have them sent to these people so that its easier to get the devices to those people in those countries.

so if i can have names who wants to be the reps that would be good

thanks

Cablebasher · Post by **Cablebasher** » Wed Mar 30, 2016 8:14 am

10x 5C3
10x 5C3/2

for me.

maybe more.

I am based in UK.

ttown23 · Post by **ttown23** » Wed Mar 30, 2016 10:50 am

I'm happy to be the USA rep

monstrinho · Post by **monstrinho** » Wed Mar 30, 2016 11:29 am

I'll need at least 16 x 5C3/2, possibly some of the others depending on what the final price ends up being. I'm in the US.

jhulk · Post by **jhulk** » Wed Mar 30, 2016 2:29 pm

there sending me some samples of each type so who wants to test them

also been talking to the rep and they are doing some other special discontinued chips which im excited about but ill leave that until i get some samples but it does mean no stupid ridiculous prices like some people are charging for nos versions

there sending the samples out this week

J3RK · Post by **J3RK** » Wed Mar 30, 2016 2:41 pm

jhulk wrote:there sending me some samples of each type so who wants to test them

also been talking to the rep and they are doing some other special discontinued chips which im excited about but ill leave that until i get some samples but it does mean no stupid ridiculous prices like some people are charging for nos versions

there sending the samples out this week

Do those start with UA or SAD?

jhulk · Post by **jhulk** » Wed Mar 30, 2016 3:03 pm

yes ua is one
sad they did not mention it to me but i have now asked the question
they are going to send me samples of the ua726 as they are remaking it
when they come available

J3RK · Post by **J3RK** » Wed Mar 30, 2016 3:08 pm

Nice! Now if they could just start making CA3280s as well, we'd be all set!

papz · Post by **papz** » Wed Mar 30, 2016 3:08 pm

jhulk wrote:they are going to send me samples of the ua726 as they are remaking it

Now that's interesting !

yan6 · Post by **yan6** » Wed Mar 30, 2016 3:40 pm

Ya I need a few UA's too

jhulk · Post by **jhulk** » Wed Mar 30, 2016 4:04 pm

yes all these buchla stuff that uses lots of vactrols and ua726

there are a ton of roland synths that use the ua726

Grumskiz · Post by **Grumskiz** » Wed Mar 30, 2016 4:34 pm

J3RK wrote:Nice! Now if they could just start making CA3280s as well, we'd be all set!

Maybe we might be able to bug Rochester into remaking it. AFAIK, they started producing the CA3080 once again.

monstrinho · Post by **monstrinho** » Thu Mar 31, 2016 12:20 am

If they were to do a run of SAD1024A, that would be a huge lifeline to a lot of people!! The Reticon chips were used in so many cool pieces of gear (Wilson Analog Delay, the original EH Memory Man etc etc). I'm not holding my breath, but I'd be a really happy camper if it were to happen.

jhulk · Post by **jhulk** » Thu Mar 31, 2016 2:27 pm

the ca3280s is on there pending list and they are looking into the sad chips
but they are focusing on the ua726 prototypes once they have them done then they will decide which chip is done next

i had that email today from the production and a and d department manager for xvive

momo · Post by **momo** » Thu Mar 31, 2016 2:56 pm

Hello I'd like to up my quantities from 15 to 30 (i.e. doubling) per 5C1, 5C3 and 5C3/2 models. Thanks.

ehafh · Post by **ehafh** » Thu Mar 31, 2016 3:36 pm

Isaiah wrote:jhulk
It seems all the relevant information for the group buy is scattered across several posts and threads with no links between.
Can I suggest you edit your original post to have all the information accessible in one place?
Kudos for organising this.

+1 to this, please update the original post when you can.

i'd like to buy some but seeing the price and shipping info etc in first post would help me out a lot.

jhulk · Post by **jhulk** » Thu Mar 31, 2016 4:31 pm

here is the xvive price list

OrganFixer · Post by **OrganFixer** » Thu Mar 31, 2016 8:07 pm

I'll go in for

10 - 5C1
10 - 5C3

greenskull · Post by **greenskull** » Thu Mar 31, 2016 8:30 pm

Great! You can put me down for:
10 = SC3
3 = SC3/2 (just need this small amount for MXR phase 100 build)

I'm in the USA.

Hope we meet the quantity discounts!

MOD WIGGLER

MOD WIGGLER

xvive group buy fo vactrols