Animal Factory Amplification

New Hosted Sub-Forum. Check it out here:
Not exactly a new manufacturer but new to us. Check out their pedal and eurorack product and extend them a welcome all the way to Mumbai!

TUMBADORA (CR8000 conga) board sets and panels. anyone?

From circuitbending to homebrew stompboxes & synths, keep the DIY spirit alive!

Moderators: Kent, Joe., luketeaford, Kent, Joe., luketeaford

User avatar
falafelbiels
still learning to wiggle
Posts: 4356
Joined: Tue Aug 04, 2009 7:15 am
Location: Rotterdamm son

TUMBADORA (CR8000 conga) board sets and panels. anyone?

Post by falafelbiels »

hey guys,

so I presented this in the gloat thread earlier, a funny little thing that just so happened to work right away, how 'bout that huh?

Tumbadora, CR8000 congas (to go with that Clawbell you just finished)

Image
Image
Image
https://soundcloud.com/falafel-biels/flflr-perc-demo

I am slowly taking that CR8000 apart, drum by drum, making 4hp preset drum sounds out of them if possible.

These Tumbadora are full on 0805 SMD except for the electrolytics and some obvious stuff. I thoroughly don't enjoy soldering SMD electros so I spare me and you the hassle. There is not too much on there and definitely nothing special (well, maybe the pushbuttons).

run these with a 4ms RCD or some euclidean contraption and they will groove your set up for sure (like in that noisy demo)


So who wants to build this?
These will go for €15 a PCB set and €5 for a panel (ex VAT).
I charge €3 P&P worldwide.

Panels will be either wood, or "ivory" perspex as in the piccies above.

will be posting a BOM shortly, but really it isn't much. (done added that)


I ran out of the first ten of these real quick and want to order some more soon. Who's up for it too?
:wookie:

=====================================


This is who's up:

Gbiz
Fluffybeard
sammy123
timpecter
soundpool
berenie
yan6
Grilojoe
Suf-fuD
Indigoid
Euromorcego
Jaidee
Davidschwan1
Coconuts
mbroers

=====================================
Attachments
Tumbadora 1.0 BOM v2.pdf
(1 MiB) Downloaded 73 times
Last edited by falafelbiels on Mon Aug 24, 2015 8:50 am, edited 14 times in total.
User avatar
gbiz
Super Deluxe Wiggler
Posts: 1092
Joined: Tue May 07, 2013 11:20 am
Location: Sussex, UK

Post by gbiz »

falafelbiels put me down for PCB & wood panel please.
:goo:
fluffybeard
Common Wiggler
Posts: 104
Joined: Thu Jul 18, 2013 6:19 am
Location: Sundbyberg, Sweden

Post by fluffybeard »

Pcb and wood panel for me!
User avatar
falafelbiels
still learning to wiggle
Posts: 4356
Joined: Tue Aug 04, 2009 7:15 am
Location: Rotterdamm son

Post by falafelbiels »

gbiz & fluffybeard

Sure thing!
sammy123
Super Deluxe Wiggler
Posts: 1243
Joined: Sun Mar 24, 2013 12:36 pm

Post by sammy123 »

Oh what the hell, why not? I'll take a pcb/panel set.
User avatar
timpecter
Common Wiggler
Posts: 138
Joined: Fri Apr 01, 2011 4:54 pm

Post by timpecter »

A PCB set for me, please! You know I love your work.
SoundPool
Veteran Wiggler
Posts: 584
Joined: Sun Nov 16, 2008 11:15 am
Location: Vienna

Post by SoundPool »

yes- one set
User avatar
berenie
Common Wiggler
Posts: 131
Joined: Fri Nov 21, 2014 12:02 pm
Location: nederland

Post by berenie »

Cheers! that was quick, pcb set for me! (berend)
User avatar
falafelbiels
still learning to wiggle
Posts: 4356
Joined: Tue Aug 04, 2009 7:15 am
Location: Rotterdamm son

Post by falafelbiels »

Isn't it? That's what happens when shit works right away...

And I ordered protos for a new and related project a couple of days ago, who knows...
User avatar
yan6
Ultra Wiggler
Posts: 996
Joined: Sat Jun 15, 2013 7:14 pm
Location: Ontario, Canada

Post by yan6 »

Well I got to keep the collection going , I will take one of these with a wood panel :hyper:
User avatar
berenie
Common Wiggler
Posts: 131
Joined: Fri Nov 21, 2014 12:02 pm
Location: nederland

Post by berenie »

Good stuff!! and like its name.

Now what about a tune mod! or would this effect all tumbadora's?
User avatar
falafelbiels
still learning to wiggle
Posts: 4356
Joined: Tue Aug 04, 2009 7:15 am
Location: Rotterdamm son

Post by falafelbiels »

they are 3 separate voices using these T-bridge oscillators so I guess it can be done easily by swapping some resistors with pots.
I like them like they are right now but when I get new boards in I will have a go at it.
User avatar
berenie
Common Wiggler
Posts: 131
Joined: Fri Nov 21, 2014 12:02 pm
Location: nederland

Post by berenie »

thanks, kind of interesting that the lower two are pretty close to each other compared to that hi one.. sounds good! but where would i put that tune pot :hmm:
User avatar
falafelbiels
still learning to wiggle
Posts: 4356
Joined: Tue Aug 04, 2009 7:15 am
Location: Rotterdamm son

Post by falafelbiels »

make a wider panel?
User avatar
grilojoe
Wiggling with Experience
Posts: 358
Joined: Thu May 16, 2013 2:50 am

Post by grilojoe »

I'll get in on the next run.

pcbs & panel (perspex) for me plz.

Now you'll excuse me, I'm off to sell a kidney. :omg:
User avatar
berenie
Common Wiggler
Posts: 131
Joined: Fri Nov 21, 2014 12:02 pm
Location: nederland

Post by berenie »

ok obvious!! :doh:
Suf-fuD
Common Wiggler
Posts: 56
Joined: Sun Feb 23, 2014 10:43 am

Post by Suf-fuD »

Please count me in for a panel/pcb set when they're ready. Thanks!
User avatar
falafelbiels
still learning to wiggle
Posts: 4356
Joined: Tue Aug 04, 2009 7:15 am
Location: Rotterdamm son

Post by falafelbiels »

grilojoe

I will stick youin this run for my convenience and you can paypal me when you get rid of that kidney, okay?

Suf-fuD

You're in
User avatar
grilojoe
Wiggling with Experience
Posts: 358
Joined: Thu May 16, 2013 2:50 am

Post by grilojoe »

you got it, brother. Thanks!
User avatar
jsleeio
Super Deluxe Wiggler
Posts: 1988
Joined: Thu May 29, 2014 7:52 pm
Location: Sydney, Australia

Post by jsleeio »

yesssssss please! (pcbs+acrylic panel)

would really like the wood but Australian Quarantine is very strict
Zap him again! ZAP THE SONOFABITCH AGAIN!
User avatar
falafelbiels
still learning to wiggle
Posts: 4356
Joined: Tue Aug 04, 2009 7:15 am
Location: Rotterdamm son

Post by falafelbiels »

indigoid

Sho nuff
User avatar
falafelbiels
still learning to wiggle
Posts: 4356
Joined: Tue Aug 04, 2009 7:15 am
Location: Rotterdamm son

Post by falafelbiels »

Okay I am going to try something new for me with this so you all might have to bear the consequences. Won't be too bad and the price will go down so yeah. I think it can hardly go wrong.

Still confident? Cool.

I am going to have these made on one board with a slit through the middle so you can break/ cut them in two. New to me, nothing new to the world however. Also I am going to order tonight and more than enough to accomodate this run plus some.
sammy123
Super Deluxe Wiggler
Posts: 1243
Joined: Sun Mar 24, 2013 12:36 pm

Post by sammy123 »

Rock on brother. :tu:
User avatar
home_listening
Veteran Wiggler
Posts: 667
Joined: Fri Dec 30, 2011 7:05 am
Location: locating
Contact:

Post by home_listening »

Very cool!

Your studio looks interesting, if you ever want to take some photos I'd love that!
User avatar
falafelbiels
still learning to wiggle
Posts: 4356
Joined: Tue Aug 04, 2009 7:15 am
Location: Rotterdamm son

Post by falafelbiels »

My studio? Do I have a studio?
Post Reply

Return to “Music Tech DIY”