VCF303, OSC303 and MODSEQ kits now at Thonk

Cwejman, Doepfer, Erica, MakeNoise, Mutable instruments, TipTop Audio, Analogue Solutions, and much more! The world’s most popular format.
Be sure to look into MANUFACTURER SUB-FORA as well..

Moderators: Kent, luketeaford, Joe.

User avatar
phono1337
2SK30A-O
Posts: 1223
Joined: Sun Nov 29, 2009 5:10 am
Location: temple of x0x

VCF303, OSC303 and MODSEQ kits now at Thonk

Post by phono1337 »

EDIT: VCF303, OSC303 and MODSEQ kits now at Thonk

:bananaguitar:
Last edited by phono1337 on Tue Sep 20, 2016 4:34 am, edited 8 times in total.
User avatar
Flux302
Wiggling with Experience
Posts: 441
Joined: Tue Jun 11, 2013 2:29 pm
Location: Delaware (near Philly)

Post by Flux302 »

I absolutely love kits. MO kits the better. I prefer complete kits but if I have to do some hunting that's OK. So long as it's well detailed.
User avatar
cubisteffects
Common Wiggler
Posts: 97
Joined: Fri Jul 08, 2011 8:47 am
Location: Sydney, Australia

Post by cubisteffects »

Definitely.
:cloud:
User avatar
milkshake
Super Deluxe Wiggler
Posts: 1489
Joined: Mon Jul 22, 2013 6:19 am

Post by milkshake »

Does this mean that the VCF303 will be out of production soon?
Shall I ... blablabla ... to thee.

The more you pay for something, the less likely you are to critise it.

ContraPoints
User avatar
phono1337
2SK30A-O
Posts: 1223
Joined: Sun Nov 29, 2009 5:10 am
Location: temple of x0x

Post by phono1337 »

milkshake wrote:Does this mean that the VCF303 will be out of production soon?
there's still plenty of stock at Analog Haven and Escape from Noise among other vendors. However I'm no longer producing modules in thru hole (except the ModSeq) so its a while stocks last.

:tu:
User avatar
Microscopial
"stripes!!!" what me mmmm
Posts: 1394
Joined: Mon Jan 10, 2011 4:25 pm
Location: peterborough UK

Post by Microscopial »

Yes please. Pcb/faceplates
lamond design
"working with wood"

email/ lamonddesign@gmail.com
flickr/ http://www.flickr.com/photos/59671775@N03/
twitter/ lamonddesign http://twitter.com/#!/
facebook/ ross lamond http://www.facebook.com/ross.lamond1 or follow the lamonddesign page
website/ www.lamonddesign.co.uk
Brunstein
Common Wiggler
Posts: 84
Joined: Wed Jan 09, 2013 12:02 pm
Location: Portugal

Post by Brunstein »

Yes please! I'm a fan of full kits.
euromorcego
Super Deluxe Wiggler
Posts: 2826
Joined: Sat Jan 18, 2014 6:22 am

Post by euromorcego »

Yes, yes, yes, yes .... i would go for a full kit. Essential and rare components only (plus pcb/frontplate) would also be ok. Have a modseq and like it very much, a vcf303 as kit would be fantastic ...
User avatar
oberkorn
Veteran Wiggler
Posts: 660
Joined: Tue Jan 18, 2011 6:30 am
Location: Sweden, bork bork bork
Contact:

Post by oberkorn »

yes please! would like PCBs only to go with acrylic panel.

what are the substitute parts btw?
you have to pay for the music but the noise is free
User avatar
phono1337
2SK30A-O
Posts: 1223
Joined: Sun Nov 29, 2009 5:10 am
Location: temple of x0x

Post by phono1337 »

oberkorn wrote:yes please! would like PCBs only to go with acrylic panel.

what are the substitute parts btw?
this is what was used in the production runs

J201 instead of 2sk30ao
matched pairs for 1583 and 2291
User avatar
twospartans
Common Wiggler
Posts: 198
Joined: Wed Feb 08, 2012 2:57 pm
Location: philadelphia, pa

Post by twospartans »

i love kits!
but i also like the pcb+panel+parts option..

i am beginning to design my own panels for sdiy projects and most likely won't be interested in panels in the near future.

thanks so much for this!
User avatar
negativspace
Manhattan Analog
Posts: 6577
Joined: Tue Apr 13, 2010 2:50 am
Location: Manhattan, KS, USA
Contact:

Post by negativspace »

Even though I sold mine to help fund the Devilfish 303 that replaced it, I miss it. I'd build another in a heartbeat if a PCB set were available! (I have the rare transistors on hand so no problem there.)
User avatar
rjp2
Common Wiggler
Posts: 90
Joined: Wed Mar 06, 2013 6:50 pm
Location: West Coast

Post by rjp2 »

I would love a full kit
User avatar
morphic
Super Deluxe Wiggler
Posts: 1669
Joined: Sat Dec 10, 2011 6:43 pm
Location: Stonehenge U?K

Post by morphic »

I have two but if I didnt I would buy one in a heart beat :sb:
tasteless
Learning to Wiggle
Posts: 35
Joined: Fri Aug 30, 2013 10:22 am
Location: Australia

Post by tasteless »

PCB and Panel would probably be too hard to resist for Me.
User avatar
synaptech
Wiggling with Experience
Posts: 363
Joined: Wed Aug 10, 2011 12:12 pm
Location: San Jose, CA

Post by synaptech »

[video][/video]
This would be very tempting.
User avatar
Barcode
Ultra Wiggler
Posts: 849
Joined: Sun Nov 20, 2011 12:12 pm
Location: The Wasatch Front

Post by Barcode »

Fantastic! I would love a PCB and panel. :tu:
Last edited by Barcode on Mon Mar 17, 2014 11:42 am, edited 1 time in total.
User avatar
dJ dAb
Common Wiggler
Posts: 185
Joined: Sun Sep 29, 2013 1:39 am
Location: Tacoma, WA

Post by dJ dAb »

Yes, and OSC303. Heck, just sell me PCBs.
Hmmm... been dabbling in Electronic music & DJing for 25+ years. Collector & curator of a fairly large vintage recording studio. Ran a couple record labels featuring DJ ESP, Hakan Lidbo, Jacob London, Martin Venetjoki, Vitamin D, Chris Anderson, etc. and licensed to greats like Carl Cox, Dave Angel, Chris Simmonds, etc. Oh yeah, I'm also a builder of D.I.Y. electronics junk, including a mighty fine modular synth.

Frac Rak Users!
User avatar
phono1337
2SK30A-O
Posts: 1223
Joined: Sun Nov 29, 2009 5:10 am
Location: temple of x0x

Post by phono1337 »

dJ dAb wrote:and OSC303
one thing at a time :deadbanana:
User avatar
wired
Wiggling with Experience
Posts: 408
Joined: Sat Aug 18, 2012 11:45 am
Location: Europe - Belgium
Contact:

Post by wired »

And the DrumDokta :yay:
Wired to Make Noise
User avatar
Junk Rhythm
Big Bottom Shaker
Posts: 2250
Joined: Wed Mar 11, 2009 2:16 pm
Location: Austin, TX
Contact:

Post by Junk Rhythm »

PCB and panel would be the only items I need.
User avatar
phono1337
2SK30A-O
Posts: 1223
Joined: Sun Nov 29, 2009 5:10 am
Location: temple of x0x

Post by phono1337 »

wired wrote:And the DrumDokta :yay:
Theres going to be a MKII version of the dokta, there is something else coming before that though (soonish) ;)

Ok let's keep on topic here please, this is about the VCF303 only.
User avatar
windspirit
Super Deluxe Wiggler
Posts: 3171
Joined: Thu Sep 20, 2012 11:43 pm
Location: krellifornia

Post by windspirit »

Super down for pcb/ faceplate action
Suf-fuD
Common Wiggler
Posts: 56
Joined: Sun Feb 23, 2014 10:43 am

Post by Suf-fuD »

Hi there panel and pcb for me if this goes ahead please. I prefer to find my own parts, as this is in my own time....sometimes it's easier (for a common pauper like me) to fund a project that way compared to full kits. :)
User avatar
dJ dAb
Common Wiggler
Posts: 185
Joined: Sun Sep 29, 2013 1:39 am
Location: Tacoma, WA

Post by dJ dAb »

phono1337 wrote:
dJ dAb wrote:and OSC303
one thing at a time :deadbanana:
Sorry, couldn't imagine a world with one, without the other :twisted:
Hmmm... been dabbling in Electronic music & DJing for 25+ years. Collector & curator of a fairly large vintage recording studio. Ran a couple record labels featuring DJ ESP, Hakan Lidbo, Jacob London, Martin Venetjoki, Vitamin D, Chris Anderson, etc. and licensed to greats like Carl Cox, Dave Angel, Chris Simmonds, etc. Oh yeah, I'm also a builder of D.I.Y. electronics junk, including a mighty fine modular synth.

Frac Rak Users!
Post Reply

Return to “1U & 3U Eurorack Modules”