Make Noise XPO

Cwejman, Doepfer, Erica, MakeNoise, Mutable instruments, TipTop Audio, Analogue Solutions, and much more! The world’s most popular format.
Be sure to look into MANUFACTURER SUB-FORA as well..

Moderators: Kent, Joe., luketeaford, Kent, Joe., luketeaford

Post Reply
znort101
Learning to Wiggle
Posts: 28
Joined: Sun Oct 25, 2020 10:59 am

Re: New Make Noise Module Incoming

Post by znort101 »

I have been thinking if it wasn't time for an updated sucessor of the Morphagene.
synthpriest
Common Wiggler
Posts: 191
Joined: Wed Feb 24, 2016 6:02 am
Location: inside the machine

Re: New Make Noise Module Incoming

Post by synthpriest »

I guess this is the new version of RxMx.
Powerdwarf
Ultra Wiggler
Posts: 849
Joined: Thu Jul 19, 2018 2:51 pm

Re: New Make Noise Module Incoming

Post by Powerdwarf »

msegarra wrote: Wed Jul 06, 2022 4:18 pm
Powerdwarf wrote: Wed Jul 06, 2022 4:16 pm
wonkychris wrote: Wed Jul 06, 2022 3:51 pm Make Noise reimagining of a Mutable Stages 'modulation Swiss army knife' would be great. Maybe not a reimagining but something along those lines

That module is a great loss :-(
what loss
Mutable instruments is done
there are millions of clones it will live forever dude
User avatar
Ghost_the_garden
Common Wiggler
Posts: 88
Joined: Wed Nov 18, 2015 10:30 pm
Location: Ohio

Re: New Make Noise Module Incoming

Post by Ghost_the_garden »

Powerdwarf wrote: Wed Jul 06, 2022 6:28 pm
msegarra wrote: Wed Jul 06, 2022 4:18 pm
Powerdwarf wrote: Wed Jul 06, 2022 4:16 pm
wonkychris wrote: Wed Jul 06, 2022 3:51 pm Make Noise reimagining of a Mutable Stages 'modulation Swiss army knife' would be great. Maybe not a reimagining but something along those lines

That module is a great loss :-(
what loss
Mutable instruments is done
there are millions of clones it will live forever dude
Stages has few-no clones
User avatar
roqeja
Wiggling with Experience
Posts: 478
Joined: Sat Jun 16, 2012 10:24 am
Location: NY/NJ/LA

Re: New Make Noise Module Incoming

Post by roqeja »

Skateboard interface module, 6hp
FS: Harvestman Tyme Sefari and SOT Mk2, Synthrotek EKO
WTB: LZX VWG, A-198 Ribbon controller, Trigger Riot, Circadian Rhythm, d0, Storage Strip
User avatar
itemgod
Common Wiggler
Posts: 121
Joined: Tue Mar 15, 2022 2:37 pm
Location: East Coast USA

Re: New Make Noise Module Incoming

Post by itemgod »

Ooooooo yes, my wallet is not ready :hihi:

I think others are on the right track. I'm getting some kind of segment generator a la Mutable Stages. Some kind of hybrid ADSR/sequencer strange thing that outputs complex envelopes and LFOs.

I certainly hope it's a modulation module because that's kind of what I need.
new signature don't steal
User avatar
Stab Frenzy
Super Deluxe Wiggler
Posts: 1085
Joined: Wed Mar 03, 2010 5:46 am
Location: Melbourne

Re: New Make Noise Module Incoming

Post by Stab Frenzy »

roqeja wrote: Wed Jul 06, 2022 9:54 pm Skateboard interface module, 6hp
I heard 10hp
E796C9D4-292C-4406-9AAC-C6D17DD01D90.jpeg
(PS apologies to Tony for flipping him round and making him regs)
Last edited by Stab Frenzy on Thu Jul 07, 2022 7:58 am, edited 1 time in total.
User avatar
KSS
Super Deluxe Wiggler
Posts: 9676
Joined: Mon Jan 25, 2016 7:28 am

Re: New Make Noise Module Incoming

Post by KSS »

MakeNoise Graphics Obsfuscation Transmogrifying Panel And Text Clarifying Helper?
GOTPATCH?
Treat utility modules as stars instead of backup singers.
Treat power supplies like Rockstars instead of roadies!
Chase magic sound, not magic parts.
User avatar
vidret
Veteran Wiggler
Posts: 593
Joined: Sun Jul 30, 2017 10:26 pm
Location: Skogen

Re: New Make Noise Module Incoming

Post by vidret »

Stab Frenzy wrote: Thu Jul 07, 2022 4:25 am
roqeja wrote: Wed Jul 06, 2022 9:54 pm Skateboard interface module, 6hp
I heard 10hp

Image
Tony Rolando's Pro Patcher
User avatar
studioutopia
Ultra Wiggler
Posts: 776
Joined: Wed Feb 19, 2020 9:28 pm
Location: Toronto, Canada

Re: New Make Noise Module Incoming

Post by studioutopia »

commoner wrote: Wed Jul 06, 2022 4:23 pm 20hp succulent planter for the ultimate in studio integration.
This post just won ModWiggler.

I hope it has biofeedback CV outputs like the Instruō Scion.
Of course, the black version is only available on the Shared System.
User avatar
efluon
Wiggling with Experience
Posts: 276
Joined: Wed Mar 29, 2017 8:19 am
Location: There is no planet Earth

Re: New Make Noise Module Incoming

Post by efluon »

I think it is obvious from the graphic elements that this has to have something to do with lines. so maybe a 2hp morphagene w/ working firmware?
miles_macquarrie
Veteran Wiggler
Posts: 650
Joined: Fri Dec 25, 2015 7:43 pm
Location: Atlanta, GA
Contact:

Re: New Make Noise Module Incoming

Post by miles_macquarrie »

I just hope we get a new thread once the module is actually announced.
User avatar
starthief
Super Deluxe Wiggler
Posts: 6497
Joined: Tue Oct 04, 2016 10:39 am
Location: St Louis, MO
Contact:

Re: New Make Noise Module Incoming

Post by starthief »

efluon wrote: Thu Jul 07, 2022 8:04 am I think it is obvious from the graphic elements that this has to have something to do with lines. so maybe a 2hp morphagene w/ working firmware?
The skateboarding one made me chuckle, but this one made me snort out loud and startle a coworker.
Anarcopapi
Learning to Wiggle
Posts: 3
Joined: Fri Nov 08, 2019 4:14 pm
Location: Mexico

Re: New Make Noise Module Incoming

Post by Anarcopapi »

I’d love to see something in the spirit of Black Corporation’s Deckard’s Voice. It would be kind of unexpected and also satisfy the 0-Coast enthusiasts that don’t gel with it being a stand alone.
Also, a more classic 296-esque Spectral Processor would be nice.
Portabella
Veteran Wiggler
Posts: 544
Joined: Sun Oct 22, 2017 4:03 pm
Location: EU/UK

Re: New Make Noise Module Incoming

Post by Portabella »

izmond wrote: Tue Jul 05, 2022 4:59 pm Wogglebug update with noise flavors instead of oscillators.
preach it ! :sb:
User avatar
efluon
Wiggling with Experience
Posts: 276
Joined: Wed Mar 29, 2017 8:19 am
Location: There is no planet Earth

Re: New Make Noise Module Incoming

Post by efluon »

miles_macquarrie wrote: Thu Jul 07, 2022 8:08 am I just hope we get a new thread once the module is actually announced.
Not if the module will actually be named "Incoming".
hdd
Wiggling with Experience
Posts: 329
Joined: Thu Sep 02, 2010 3:24 am
Location: toulouse (FR)

Re: New Make Noise Module Incoming

Post by hdd »

i can telll from the picture that it's definitly an updated mangrove
Stu B
Veteran Wiggler
Posts: 544
Joined: Sat Nov 06, 2021 1:24 am
Location: Uk

Re: New Make Noise Module Incoming

Post by Stu B »

As long as it’s not something unbearable dull like a mult or an outs I’m pretty much guaranteed to buy it.
User avatar
Crevice
Common Wiggler
Posts: 73
Joined: Sun Jan 20, 2019 11:03 pm
Location: San Francisco

Re: New Make Noise Module Incoming

Post by Crevice »

There are too many good guesses for this thread to go away once the new module is announced. I'll just change the subject line to the new module name and if it's indeed named "incoming", everyone owes me 1 used passive mult so I can build the largest rack made of just passive mults in history. So, not only does the future include a new module, but a possible dance in the book of Guinness World Records.
stripou
Common Wiggler
Posts: 229
Joined: Tue Jan 12, 2021 9:36 am

Re: New Make Noise Module Incoming

Post by stripou »

Anarcopapi wrote: Thu Jul 07, 2022 8:36 am Also, a more classic 296-esque Spectral Processor would be nice.
Bank!


Also can we stop with the passive mult jokes pls my moms a passive mult.
wiresandstraps
R.T.F.M.
Posts: 362
Joined: Thu Dec 30, 2010 11:11 pm
Location: New York

Re: New Make Noise Module Incoming

Post by wiresandstraps »

Hoping for a new filter to replace the discontinued multi mode gate.

I missed the chance to grab one when new and won’t allow myself to pay the used prices.
Portabella
Veteran Wiggler
Posts: 544
Joined: Sun Oct 22, 2017 4:03 pm
Location: EU/UK

Re: New Make Noise Module Incoming

Post by Portabella »

wiresandstraps wrote: Thu Jul 07, 2022 10:50 am Hoping for a new filter to replace the discontinued multi mode gate.

I missed the chance to grab one when new and won’t allow myself to pay the used prices.
the good vactrols are discontinued :miley: no more proper gates
User avatar
prphnc
Veteran Wiggler
Posts: 732
Joined: Sat Sep 16, 2017 8:14 am
Location: Berlin

Re: New Make Noise Module Incoming

Post by prphnc »

I think Tony is going back to the roots and presenting us the Format Jumbler V2.
User avatar
EPTC
Super Deluxe Wiggler
Posts: 1820
Joined: Thu May 14, 2015 9:01 am
Location: Austin TX
Contact:

Re: New Make Noise Module Incoming

Post by EPTC »

Food dehydrator with voltage controlled rotisserie.
User avatar
fastlanestranger
Wiggling with Experience
Posts: 423
Joined: Fri May 21, 2021 8:51 am
Location: Cathedral City CA

Re: New Make Noise Module Incoming

Post by fastlanestranger »

stripou wrote: Thu Jul 07, 2022 10:42 am
Anarcopapi wrote: Thu Jul 07, 2022 8:36 am Also, a more classic 296-esque Spectral Processor would be nice.
Bank!


Also can we stop with the passive mult jokes pls my moms a passive mult.
This almost covered my monitor with coffee.
Post Reply

Return to “1U & 3U Eurorack Modules”