Module for taming/mangling Batumi

Cwejman, Doepfer, Erica, MakeNoise, Mutable instruments, TipTop Audio, Analogue Solutions, and much more! The world’s most popular format.
Be sure to look into MANUFACTURER SUB-FORA as well..

Moderators: Kent, luketeaford, Joe.

DDJ
Wiggling with Experience
Posts: 255
Joined: Thu Apr 16, 2015 1:42 pm
Location: canada

Module for taming/mangling Batumi

Post by DDJ »

I'm wanting for the best module to take the outputs of Batumi and combine/offset/attenuvert the waveshapes. Samara 2 looks cool but it only does offset for two channels. Tiptop MISO is cool because it crossfades.

Looking for the most function in the smallest hp.

My case lacks complex modulation so waveshape mangling is the most important part. Or do I just get a Zadar and a MISO (for Batumi) and be done with it.
cg_funk
Wiggling with Experience
Posts: 494
Joined: Wed May 23, 2018 12:56 am

Post by cg_funk »

I use a MI Blinds for that. Great module, you can never have enough VCAs.

If you just want to mainly just attenuvert and crossfade/mix waveforms, then the Lapsus Os from NE might come in handy. I don't have one yet, but I like sliders:
https://www.modulargrid.net/e/noise-eng ... -lapsus-os

Also, Planar2 could be a fun option, a bit bigger and more expensive, but so fully featured you should at least check it out. Intellijel has a lot of good youtube demos of it.
DDJ
Wiggling with Experience
Posts: 255
Joined: Thu Apr 16, 2015 1:42 pm
Location: canada

Post by DDJ »

I have both the MIAx3 and Blinds but they get used up really quickly. Looking to add another module to dedicate to the Batumi.
User avatar
nolongerhuman
Ultra Wiggler
Posts: 795
Joined: Wed Nov 13, 2013 2:40 am
Location: Portland, Oregon

Post by nolongerhuman »

I'm pretty fond of pairing Batumi with the Noise Engineering Lapsus Os.
User avatar
mgscheue
Ultra Wiggler
Posts: 847
Joined: Wed Jul 30, 2014 9:34 pm
Location: Michigan

Post by mgscheue »

Blinds is great with Batumi. And Drezno makes for a nice mangler. I don’t have one but I imagine Kinks would be useful, too.
User avatar
bedhed3000
Wiggling with Experience
Posts: 393
Joined: Fri Aug 25, 2017 11:30 am
Location: California
Contact:

Post by bedhed3000 »

Don't forget about 4MS Shifting Inverting Signal Mingler
User avatar
windspirit
Super Deluxe Wiggler
Posts: 3171
Joined: Thu Sep 20, 2012 11:43 pm
Location: krellifornia

Post by windspirit »

<self promotion> if you want something that does a bit more than just attenuvert and offset (although it can do that too) check out my module Ana, it has 4 inputs and 6 different ways of combining the inputs together using analog logic functions. </self promotion>

[video][/video]
User avatar
mookmoof
Wiggling with Experience
Posts: 310
Joined: Thu Oct 18, 2012 10:59 pm
Location: tampa

Re: Module for taming/mangling Batumi

Post by mookmoof »

DDJ wrote:I'm wanting for the best module to take the outputs of Batumi and combine/offset/attenuvert the waveshapes.
MIA seems tough to beat for the size

I'm also wanting the A-138m for this. Not low hp, but it does all of the above and in multiple variations for related modulations
hinterlands303

Post by hinterlands303 »

uMod is a lot of fun with any two bipolar CV sources (although it's out of production)
User avatar
cptnal
Super Deluxe Wiggler
Posts: 4131
Joined: Wed Jun 14, 2017 2:48 am
Location: People's Republic of Scotland

Post by cptnal »

Don't forget XAOC's own Samara. Version two, out now/soon(?) has a few funky features that make it more than an attenuverting mixer.
Is it finished?
Latest Tune:
Sounds: SoundCloud , Freesound
Racks: Big Case, Funboat, Tinicase
Parnelli
Super Deluxe Wiggler
Posts: 1466
Joined: Wed May 03, 2017 6:04 pm
Location: Utah

Post by Parnelli »

Though there's no controls on the device I use a Worng Vector Space to mash three different signals together for a host of resulting CV outputs... though I generally use two or three different LFOs instead of the Batumi outputs. I use the Butami in phased mode mostly.
User avatar
MarcelP
Super Deluxe Wiggler
Posts: 1923
Joined: Sun Sep 04, 2016 4:52 am
Location: England, Saffron Walden

Re: Module for taming/mangling Batumi

Post by MarcelP »

mookmoof wrote:
DDJ wrote:I'm wanting for the best module to take the outputs of Batumi and combine/offset/attenuvert the waveshapes.
MIA seems tough to beat for the size

I'm also wanting the A-138m for this. Not low hp, but it does all of the above and in multiple variations for related modulations
A-138m - relatively cheap, readily available, nicely wiggle-able and does offset using top row of pots. Add a quad VCA and you have modulation central. It is a great addition to Batumi.
User avatar
tebs213
Wiggling with Experience
Posts: 295
Joined: Fri Jan 08, 2016 11:20 am
Location: Los Angeles
Contact:

Post by tebs213 »

WMD/SSF is a great one, lives next to my Batumi. Blinds is also wonderful for any modulation combinations. I keep Kinks and Toolbox nearby both of those as well and Batumi goes through both of those often.
User avatar
vibralux
Veteran Wiggler
Posts: 708
Joined: Wed Sep 29, 2010 5:16 am
Location: Warsaw, Poland

Post by vibralux »

+1 on ANA. Also Erica Synths Black CV Tools offers a lot of functionality, although takes a bit more HP
MY YT CHANNEL WITH MODULES REVIEWS:
https://www.youtube.com/channel/UC3IgU2 ... hKH8ou7YTQ

MODULARS, ABLETON, MIXING. Stop reading manuals. Start making music.
http://www.colormysound.com/
gb2
Common Wiggler
Posts: 128
Joined: Thu Feb 25, 2016 9:51 am

Post by gb2 »

Basic stuff, but I have a half wave rectifier and an attenuator sitting next to Batumi.
User avatar
MossGarden
Veteran Wiggler
Posts: 548
Joined: Fri Jan 15, 2016 2:50 pm
Location: Somewhere

Post by MossGarden »

Samara II
User avatar
mdoudoroff
Super Deluxe Wiggler
Posts: 4778
Joined: Fri Jul 17, 2015 8:10 am
Location: New York City

Post by mdoudoroff »

On the compact side, I’ve used the 4hp ALM O/A/x2 with Batumi for years.

I also keep the clever 8hp Klavis Mixwitch next to Batumi.
DDJ
Wiggling with Experience
Posts: 255
Joined: Thu Apr 16, 2015 1:42 pm
Location: canada

Post by DDJ »

Damn, guys. Lots of suggestions in here. Im going to have to head over to modulargrid when I have a few hours to spare.

I notice that no one recommended Zadar or other complex modulation sources. My guess is because even those modules would require the same kind of attenuation/offset/cross fading...
User avatar
CaneMan
Wiggling with Experience
Posts: 403
Joined: Wed Apr 12, 2017 12:27 pm
Location: Albany, NY
Contact:

Post by CaneMan »

DDJ wrote:Damn, guys. Lots of suggestions in here. Im going to have to head over to modulargrid when I have a few hours to spare.

I notice that no one recommended Zadar or other complex modulation sources. My guess is because even those modules would require the same kind of attenuation/offset/cross fading...
You know? I glossed over that last sentence in your original post. Zadar has attenuation right on the module. If you need to CV an envelope, you can use one of the assignable inputs for that purpose.

The more I look at Tiptop's MISO, the more interesting it gets, especially because of the CV crossfade.

Otherwise, my first instinct these days is to say, "Go with your gut."
User avatar
mdoudoroff
Super Deluxe Wiggler
Posts: 4778
Joined: Fri Jul 17, 2015 8:10 am
Location: New York City

Post by mdoudoroff »

DDJ wrote:Damn, guys. Lots of suggestions in here. Im going to have to head over to modulargrid when I have a few hours to spare.

I notice that no one recommended Zadar or other complex modulation sources. My guess is because even those modules would require the same kind of attenuation/offset/cross fading...
Zadar generates signals, it doesn’t modify existing ones. I think Zadar is brilliant. You have less need for attenuators for Zadar because it has a built in attenuator (with optional voltage control), but offset can still be needed sometimes. But Zadar serves other purposes than Batumi. The current epicenter of my modulation world:

Image

(O/A/x2 and Vector Spacer are also nearby, just above this row)
User avatar
phineas
Common Wiggler
Posts: 108
Joined: Mon Mar 20, 2017 8:58 am
Location: Netherlands

Post by phineas »

I like the fonitronik cascade
User avatar
dooj88
Super Deluxe Wiggler
Posts: 2796
Joined: Sun Jan 29, 2017 7:31 pm
Location: VA
Contact:

Post by dooj88 »

frames in wavetable VCA mode. i don't think the outputs are a cascaded mixer like veils/blinds, but there is a mix output. but you're getting modulated modulation that can be modulated on 4 channels.
User avatar
Buttons ARE toys
Veteran Wiggler
Posts: 555
Joined: Wed Sep 14, 2016 9:24 am
Location: Earth

Post by Buttons ARE toys »

dooj88 wrote:frames in wavetable VCA mode. i don't think the outputs are a cascaded mixer like veils/blinds, but there is a mix output. but you're getting modulated modulation that can be modulated on 4 channels.
I always forget that the channels still act as VCAs for other signals in wavetable mode. I need to play with that some more--I usually just use it at audio rate fro drones.
DDJ
Wiggling with Experience
Posts: 255
Joined: Thu Apr 16, 2015 1:42 pm
Location: canada

Post by DDJ »

Man, there are a lot of suggestions in here and, after youtube/modulargrid/muffwiggler-ing, I am feeling a little closer to making a decision. I'm still torn between a few though but know it's going to come down to pulling the trigger and see how it augments my controllability. Some options like the Mixwitch are really flexable and have me thinking outside the box. I like that.

Either way I think I'm going to add a Zadar. It's so far from the type of modulation sources that I've used over the past many years and I think I owe it to myself to see how it changes my approach.

Anyways, thanks for your input everyone. I think this will be a useful thread for when people search for modules to pair with Batumi. (when the search function works again...)
Post Reply

Return to “1U & 3U Eurorack Modules”