6MIX

Support and discussion for Antumbra modules and DIY builds

Moderators: Kent, antumbra

Post Reply
BWBKc6VyUr
Common Wiggler
Posts: 155
Joined: Thu Sep 26, 2019 1:25 am
Location: UK

6MIX

Post by BWBKc6VyUr » Mon Mar 02, 2020 12:37 pm

I just finished building a batch of 4 Antumbra 6MIX v1.1. Neat little utility module and worth every penny (i.e. virtually none), so I'd like to formally state that I'm rather pleased with it -- thanks for providing this project!
Capture.PNG
Capture.PNG (559.23 KiB) Viewed 1455 times
WTB:
Veils (pre-2020)
TipTop stackable cables (cyan/yellow/blue)

FS:
Arturia Beatstep Pro (white) - £150 + shipping
Antumbra 6MIX - £75 + shipping
Kassutronics Slope 2 - £110 + shipping

User avatar
antumbra
Common Wiggler
Posts: 74
Joined: Fri Mar 20, 2015 5:21 pm
Contact:

Re: 6MIX

Post by antumbra » Thu Apr 09, 2020 12:09 pm

Yay, I'm glad you like them! :)
www.antumbra.eu
soundcloud.com/monolitmusic

User avatar
cereyanlimusiki
Common Wiggler
Posts: 115
Joined: Sun Apr 21, 2013 4:44 pm
Location: Switzerland
Contact:

Re: 6MIX

Post by cereyanlimusiki » Thu Mar 18, 2021 5:11 pm

Hi

What would be subsitute for 595-TL072IDR as mouser has none in stock ?

cordoba899
Learning to Wiggle
Posts: 7
Joined: Thu Feb 11, 2021 2:09 pm
Location: Munich

Re: 6MIX

Post by cordoba899 » Thu Apr 29, 2021 2:34 pm

cereyanlimusiki wrote:
Thu Mar 18, 2021 5:11 pm
What would be subsitute for 595-TL072IDR as mouser has none in stock ?
Hey cereyanlimusiki, did you find a suitable replacement for TL072IDR? I am also looking for one. Thanks in advance!

bman
Learning to Wiggle
Posts: 16
Joined: Sun Jul 28, 2019 5:59 pm

Re: 6MIX

Post by bman » Mon May 03, 2021 3:50 pm

As far as I can tell TL072CD should be fine. Side by side in mouser every spec is identical. If you look at the data sheet and search for "TL072I" and "TL072C", the only difference I see is that the TL072CD has a wider range of min/max voltage/current for a few pins.

pjbulls
Wiggling with Experience
Posts: 267
Joined: Tue Feb 04, 2020 5:26 pm
Contact:

Re: 6MIX

Post by pjbulls » Mon May 03, 2021 3:54 pm

The only difference between the I and C ones is that the former has extended operating temperatures (-40 to 125°C instead of 0 to 70), so unless you'll be running your synth in an oven or are taking it to the Arctics it won't matter.

Post Reply

Return to “Antumbra”