Elka Wilgamat midi ?

Support and discussion of Tubbutec products.

Moderators: Kent, tubbutec

Post Reply
emmanuelh
1-Post Wiggler
Posts: 1
Joined: Sat Feb 06, 2021 8:41 am

Elka Wilgamat midi ?

Post by emmanuelh » Sat Feb 06, 2021 8:45 am

Hello
Is the uniPulse – universal drum machine midi interface could work with ELka Wilgamat ? and if not is there's something existing to synchronize it ...
Thanks
Emmanuel

User avatar
tubbutec
Ultra Wiggler
Posts: 780
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Re: Elka Wilgamat midi ?

Post by tubbutec » Tue Feb 09, 2021 4:09 pm

Never had the chance to install uniPulse in one.
However as far as I know, someone from https://www.portlandproaudio.com/ did install an uniPulse in a Wilgamat.

We could provide schematics with some suggested trigger points but you'd need some level of expertise to then do the install.

waveterm2
1-Post Wiggler
Posts: 1
Joined: Thu Feb 20, 2020 5:25 pm

Re: Elka Wilgamat midi ?

Post by waveterm2 » Tue Sep 14, 2021 6:39 pm

I have a Wilgamat III, and I'm interested in whatever documentation you might have for the installation of uniPulse. Which version of the product is the best for this installation? Cheers

User avatar
tubbutec
Ultra Wiggler
Posts: 780
Joined: Sat Dec 27, 2014 4:29 am
Location: Berlin
Contact:

Re: Elka Wilgamat midi ?

Post by tubbutec » Mon Sep 20, 2021 6:38 am

I attached schematics with notes of trigger inputs, direct outputs and clock inputs.
It says relay for the clock inputs, but this could be the 2xswitch that comes with uniPulse
Attachments
Wilgamat III uProc.pdf
(2.49 MiB) Downloaded 3 times
Wilgamat III Schem Markup.pdf
(1.99 MiB) Downloaded 1 time

Post Reply

Return to “Tubbutec”