ADR30 Socket Board

Discussion and support for users and builders of Oakley Sound musical products.

Moderators: Kent, Synthbuilder

Post Reply
User avatar
oozitron
solder fume huffer
Posts: 854
Joined: Fri Jan 23, 2009 6:11 pm
Location: in a beautiful place out in the country

ADR30 Socket Board

Post by oozitron » Sun Nov 22, 2020 3:10 pm

Can the ADR30 was built *without* the SREIO socket board?

ie. is there any circuitry on the SREIO (besides the anti-thump) that is necessary to its functioning?

thanks :-)
Andrew
Never want to come down, never want to put my feet back down on the ground

User avatar
Synthbuilder
Super Deluxe Wiggler
Posts: 3132
Joined: Tue Mar 24, 2009 9:12 am
Location: Cumbria, UK

Re: ADR30 Socket Board

Post by Synthbuilder » Mon Nov 23, 2020 5:12 am

oozitron wrote:
Sun Nov 22, 2020 3:10 pm
Can the ADR30 was built *without* the SREIO socket board?
Yes. Bear in mind that the I/O connector on the ADR30 is designed for a 0.1" IDC boxed header which is a little small to be soldering flying wires onto. It's no worse than soldering to stripboard though.

Tony

Post Reply

Return to “Oakley Sound Systems”