More schematics

A place to discuss the brutal yellow evil we all love so much.

Moderators: Kent, metasonix

User avatar
metasonix
Tube Pioneer
Posts: 5102
Joined: Fri Aug 03, 2007 2:35 pm

More schematics

Post by metasonix »

Starting with TX-1. Can't figure it out? Then don't try to build it--or hire a tech, dunno.
TX1schematic.gif
User avatar
prephylve
Learning to Wiggle
Posts: 50
Joined: Tue Dec 01, 2015 4:19 am

Re: More schematics

Post by prephylve »

Wow rad thanks!
User avatar
appliancide
Super Deluxe Wiggler
Posts: 1588
Joined: Fri Dec 17, 2010 9:51 am
Location: Idiocracy

Re: More schematics

Post by appliancide »

Awesome, thanks Eric! Guess it’s time to finally learn about charge pumps.
User avatar
EATyourGUITAR
has no life
Posts: 8446
Joined: Tue Aug 31, 2010 12:24 am
Location: Providence, RI, USA

Re: More schematics

Post by EATyourGUITAR »

you are my jesus
WWW.EATYOURGUITAR.COM <---- MY DIY STUFF
User avatar
metasonix
Tube Pioneer
Posts: 5102
Joined: Fri Aug 03, 2007 2:35 pm

Re: More schematics

Post by metasonix »

Found the TX2 diagram. Yes it is made of three 4BN6 beam deflection modulation tubes. Useless shit.
TX2ButtProbeschematic.jpg
User avatar
Yes Powder
Powder that makes you say "Yes"
Posts: 2434
Joined: Thu Sep 03, 2015 2:23 am
Location: Albany, New York
Contact:

Re: More schematics

Post by Yes Powder »

Guess it's time to learn me some electronics
User avatar
forbin
Common Wiggler
Posts: 133
Joined: Wed Aug 18, 2010 8:29 am
Location: Fremantle, Western Australia

Re: More schematics

Post by forbin »

The TX1 is a fascinating circuit but as Eric points out "Can't figure it out? Hire a Tech..."
Anway this MAY be of some assistance but on the otherhand it may be a complete red herring!
I found it an intersting exercise come what may... I might even build one!
TX1.png
User avatar
metasonix
Tube Pioneer
Posts: 5102
Joined: Fri Aug 03, 2007 2:35 pm

Re: More schematics

Post by metasonix »

forbin wrote: Tue Aug 11, 2020 11:53 pm The TX1 is a fascinating circuit but as Eric points out "Can't figure it out? Hire a Tech..."
Anway this MAY be of some assistance but on the otherhand it may be a complete red herring!
I found it an intersting exercise come what may... I might even build one!
It looks like the same thing but with tubes having 6v heaters. Big deal.

Anyone wanna see the TX3? It works better with 6AK5s or 6CB6s but that's your problem.
TX3schematic.jpg
User avatar
forbin
Common Wiggler
Posts: 133
Joined: Wed Aug 18, 2010 8:29 am
Location: Fremantle, Western Australia

Re: More schematics

Post by forbin »

Cool! but what we really need to build is the TM-7... as i'm getting older an Engorge button is becoming a necessity...
Trachea
Learning to Wiggle
Posts: 26
Joined: Fri Apr 28, 2017 9:26 pm

Re: More schematics

Post by Trachea »

:woah: Wow! I know I'm late to the party, yeah. Thanks! :drunkbanana: :band: :rock: :wow:
User avatar
Moog$FooL$
Broke Dick Dog
Posts: 1769
Joined: Tue Jun 03, 2008 2:54 am
Location: Vancouver, BC.

Re: More schematics

Post by Moog$FooL$ »

sure.... while were at it any chance we can see that TM-7 schematic??
i use to drink & smoke.
that fat cat had to go..... wasn't even mine.
User avatar
metasonix
Tube Pioneer
Posts: 5102
Joined: Fri Aug 03, 2007 2:35 pm

Re: More schematics

Post by metasonix »

not posting any more schemas until someone fixes this goddamned forum. It kicks me out when I try to do a search or stay logged in for more than 15 minutes....
User avatar
Moog$FooL$
Broke Dick Dog
Posts: 1769
Joined: Tue Jun 03, 2008 2:54 am
Location: Vancouver, BC.

Re: More schematics

Post by Moog$FooL$ »

BTW.... i really appreciate the schem's you already posted above. it's very generous of you.
i use to drink & smoke.
that fat cat had to go..... wasn't even mine.
User avatar
metasonix
Tube Pioneer
Posts: 5102
Joined: Fri Aug 03, 2007 2:35 pm

Re: More schematics

Post by metasonix »

I finally found the TM7 schematic. Took hours of digging in boxes. Thank me any time.
TM7schem.jpg
Compare to the TM5. Shocking how similar they are, eh? It's disgusting.
TM5schematic.jpg
User avatar
Moog$FooL$
Broke Dick Dog
Posts: 1769
Joined: Tue Jun 03, 2008 2:54 am
Location: Vancouver, BC.

Re: More schematics

Post by Moog$FooL$ »

You are a gentleman. i guess a few of us, need to go to your website & press buy on a few things..... to say the least.
Actually..... more than a few of us.

:sb: :hail: :hail:
i use to drink & smoke.
that fat cat had to go..... wasn't even mine.
User avatar
Moog$FooL$
Broke Dick Dog
Posts: 1769
Joined: Tue Jun 03, 2008 2:54 am
Location: Vancouver, BC.

Re: More schematics

Post by Moog$FooL$ »

check that.... u don't sell from your site.
off to Big city music then instead.
i use to drink & smoke.
that fat cat had to go..... wasn't even mine.
User avatar
appliancide
Super Deluxe Wiggler
Posts: 1588
Joined: Fri Dec 17, 2010 9:51 am
Location: Idiocracy

Re: More schematics

Post by appliancide »

Moog$FooL$ wrote: Sun Nov 22, 2020 11:23 pm You are a gentleman. i guess a few of us, need to go to your website & press buy on a few things..... to say the least.
Actually..... more than a few of us.

:sb: :hail: :hail:
I'm trading my module building skills for a friend's case building skills. Just picked up some trogotronic power to make sure I can run a few tube modules in 2021. Definitely going to pick up a couple of RK modules with my tax return money.

Thanks again for sharing these circuits Eric!
User avatar
BlinkyLights
Super Deluxe Wiggler
Posts: 1940
Joined: Wed Feb 13, 2019 12:16 am

Re: More schematics

Post by BlinkyLights »

Wow. Very generous to share these.

Thank you.

(will need a tech, myself)
User avatar
metasonix
Tube Pioneer
Posts: 5102
Joined: Fri Aug 03, 2007 2:35 pm

Re: More schematics

Post by metasonix »

Old filter circuit used in Wretch. Similar scheme was in the TS22 and TM2 and R-52.
(Bass version used 0.01 and 0.022 capacitors in the feedback loop)
TM2-Wretch-R52filter.jpg
User avatar
FatRocky
Super Deluxe Wiggler
Posts: 2594
Joined: Sun Oct 16, 2011 12:56 pm

Re: More schematics

Post by FatRocky »

do you have schematics for this:
Screen Shot 2020-11-26 at 10.43.15.png
User avatar
metasonix
Tube Pioneer
Posts: 5102
Joined: Fri Aug 03, 2007 2:35 pm

Re: More schematics

Post by metasonix »

FatRocky wrote: Thu Nov 26, 2020 10:44 am do you have schematics for this
Sorry can't remember, I think it was a modified TM5 or something in that area.....Zerosum did what he did, I didn't save any schemas
User avatar
Moog$FooL$
Broke Dick Dog
Posts: 1769
Joined: Tue Jun 03, 2008 2:54 am
Location: Vancouver, BC.

Re: More schematics

Post by Moog$FooL$ »

so.... anyone done any home cooking with these?? any luck??
i've been too busy.
i use to drink & smoke.
that fat cat had to go..... wasn't even mine.
User avatar
metasonix
Tube Pioneer
Posts: 5102
Joined: Fri Aug 03, 2007 2:35 pm

Re: More schematics

Post by metasonix »

TM3 VCO schematic
TM3schem.jpg
User avatar
o-live
Common Wiggler
Posts: 66
Joined: Thu Nov 24, 2011 6:08 am
Location: in space without space

Re: More schematics

Post by o-live »

what really interresting to see your research process thank you so much
Psywarfare
1-Post Wiggler
Posts: 1
Joined: Tue Jul 20, 2021 5:00 am

Re: More schematics

Post by Psywarfare »

metasonix wrote: Mon Dec 14, 2020 6:55 pm TM3 VCO schematic
TM3schem.jpg
would you please share schematic for Metasonix Ass Fister AF-150 ?
Post Reply

Return to “Metasonix”