Granted that art is not measured by bookings, air miles and big crowds; There's a great tune where Braids was used, played out on big PA, by someone who gets paid to travel and perform/party, for every "braids sounds cheap" post on the internet. This. I’d also add my incredibly important,...

Yeah I’m not sure what kind of crazy person would buy up a ton of modules and spend hours trying to build a poly synth out of them, can you imagine all the utilities you’d need? and then imagine if said crazy person wanted it to have double OSCs and Filters! A guy would have to have more time than ...

If I've got it correctly, looks like you can extend the delay time past 50ms using a different clock source at the HF input, at the expense of introducing clock noise. I wonder how slow it can go. . . ? There is no lower limit. However, at a certain point, the signal degradation will be so much tha...

I have the Doepfer A142-2, and I’m happy with it. 2x AD with vca. Cv control of one time or the other, set by jumper. Works fine in 8hp, although it’s not the most spacious. I’d agree with the general feel that combi modules may ( not always) be a bit limited to compared to specialised ones, but the...

I’ll chime in as I have quite a few different oscs. Some of the pitfalls of *not* matching….. Not all oscs deal with the same v/Oct scheme. My very first euro purchase matched ( or not) an Erica pico voice with a moog m32. The pico accepts v/oct from 0-5 volts. The m32 sequencer generates -5 to +5 v...

there are long bbd delays in pedal world, lots of. how eurorack is different, idk. Like what? Seriously, I want to know. Best pedal option IMO is relatively new AMT ADG-1, runs MN3005s for proper voltage swing, designed by Hawker, who did lots of the Moogerfoogers. Sounds absolutely glorious. The b...

My rings plugged itself into clouds, and now it has a rash.

I’m concerned.

cbm wrote: ↑Wed May 11, 2022 4:19 pm I came here for an argument.

No you didn’t!

S/H triggers from one channel of a Euclidean sequencer. Env/vca trigger from another.

Improv bass lines, melodies for days.

I’ve somehow managed to avoid joranalogue modules, despite my rampant GAS. This looks really neat though. Now, what about clouds into rings for a change

for example, the fact that a photographic film might get pushed further from its predefined value doesnt market it as 3200iso film if its actually 400 iso. actually, thats exactly what happens, film speeds are recommendations, not the base iso of the film itself, in fact, most common films sold as ...

That’s a no from me. I have a hard enough time keeping dog hair out of my gear. I don’t need to be constantly wondering whether she might have thrown up on it too.

Just why? God damn that’s ugly.

Design language? Sure, see mutable, joranalogue and others. This is just a mess.

YMMV.

I've heard that Mannequin should have some new modules. Correct? Yep A quasi zero point auto de collimater, using plane transcendent aether phones to maximise manifold splicing through incandescent resistive networks…. Apparently. This got a legit laugh from me. Can’t wait for my houseplants to mee...

rafyc wrote: ↑Fri May 06, 2022 7:52 am I've heard that Mannequin should have some new modules. Correct?

Yep

A quasi zero point auto de collimater, using plane transcendent aether phones to maximise manifold splicing through incandescent resistive networks…. Apparently.

he's on a machinist forum bitching that he ordered a bolt of one pitch and a nut of another and is raging that its the retailers responsibility to refund him because they should have known that the nut wouldnt have threaded on the bolt he ordered. That’s because one is metric and the other imperial...

JES wrote: ↑Sat May 07, 2022 1:23 pm I suspect the OP is long gone.

Probably on a motor forum, bitching that he can’t find the gas tank on his new Tesla.

My Data crashes/doesn’t boot up half of the time when powering up the rack. Not a big deal as switching off and back on again fixes it. Anyone else has this problem with Doepfer PSU3s? Also be careful with the Doepfer rocker switches, I had to replace mine after it failed and now have the case perm...

It doesn’t quite hit OPs feature list, but for completeness, I don’t think anyone has mentioned ladik? He has ( of course) a no frills, 4HP FFB for

fruitsnake wrote: ↑Wed May 04, 2022 5:24 pm

Keltie wrote: ↑Wed May 04, 2022 4:02 pm If you sample off vinyl, Symetrix 511A is like voodoo. It’s a dynamic noise filter/ gate deal.

……Picked it up ten years ago in a junk store for $40.

I might have just leaked a little.

My DF320 was £60. Bargain.

Compressors are processors too. How about compressing a very resonant filter …. Yeah, this is a classic use of a compressors in studios, and potentially useful in modular in the absence of loudness compensated filters. By extension, even a non resonant sweep might benefit from compression if the ov...

If you sample off vinyl, Symetrix 511A is like voodoo. It’s a dynamic noise filter/ gate deal. I worked on a lot of sample stuff in the 90’s, and vinyl noise was always an issue. Someone brought one of these in to the studio, and I’d never heard anything like it. Double take/ check your ears/ pinch ...

But again, I’m not sure there is a best way. Maybe by following the rules above, I’m funneling my patches down accustomed routes, whereas a different arrangement, a non-arrangement might make me patch in different and exciting ways. Also, the right layout might just come down to familiarity with wh...

It’s a bit necro, but also just to add. +1 on the one bit output. It’s the main reason I bought the module, and it’s fin awesome! To anyone that has tides v1 knocking about, but maybe updated to 2 or doesn’t use it much… you really should try Sheep. I have Tides v1, purchased last summer. I love it...

finally updated my Tides v1 to Sheep - and loving it. If anyone has a Sheep panel they don't want any more hit me up as I'm on the hunt (UK ideally) - found one in the States, but with importing costs it gets pretty expensive. It's not the most confusing module to use in its new form, but it'd defi...

output01x wrote: ↑Mon Apr 25, 2022 8:58 am Maybe buy a 9u 84hp case (Dopefer LC9?), move all modules to the new case, and sell your two SYR-E84 cases? You could then use the proceeds to acquire new modules and start filling up the 3rd row.

This is the way