No I think it's an upcoming module by AnalogFX. I recently bought their SER-2020 synton syrinx semi modular clone, so the company is genuine.
So far I'm pretty pleased about the value I get from the SER-2020, too bad the potentiometers are flimsy. Hopefully this vocoder gets better pots

Looks like pre-order is up on the website but when I proceed to purchase, my browser shows an error

-post deleted-

got one couple of months ago. Prior to that I routed the stereo outputs directly from the make noise Xpan to my mixer. Now, the transmit 2 sits inbetween. I can notice this gives hardly any distortion and far higher headroom than my previous way of routing the signal. I don't even need to measure to...

Depends on how you'll be patching also. I'd recommend a mixer with dedicated attenuators for starters. I assume you'd like to follow those mixed audio signals with a filter, which is a typical thing to do. I have two different filter modules that have 3 inputs each. Each input has its own onboard at...

forestcaver wrote: ↑Wed May 12, 2021 12:34 pm Analog tzfm (ssi2130-based) vco - 9 octaves within a cent (I cant measure a greater range, so could be more). Measured on five different units
The 2130 seems ridiculously linear (exponential !) and incredibly temerature stable.

are there any VCO modules available yet that use the 2130 or 2131?

I agree. There's definitely a learning curve and some button combo's you need to overcome, but the results you can book with this module are very rewarding and worthwile. The additive oscillator mode alone is just stellar, I think. I'm starting to get used to the UI now and it's becoming more intuit...

Interesting, I have been wondering if I should get a pair of NTO's to replace my Subcon M15's I love the sound and simplicity of the M15, and was thinking that the NTO would be similar but easier to calibrate (make tonal music) Do you like the sound of the NTO? Agreed, but the M15 and NTO take up a...

Random*source NTO.
Too much HP, far too expensive, small soundpalette.
It's good looking though.

Sugarwolf wrote: ↑Tue Mar 23, 2021 9:32 am I am also hoping for a euro version.

me too. it sounds really nice in the demos

Cwejman DMF-2. I remember the exact price at Schneidersladen from years ago, 678 euros. That's crazy considering I was a student back then. I ended up buying it anyways because I figured I might sell it for the same amount or higher if it didn't really suit me. I still use it heavily today even thou...

Yup, I had bleeding on the odd channels of the Quad VCA/VCF as well. The LPG mode sounded nice but the bleeding was the deal breaker eventually, especially since there would have been no customer service anymore because the company went out of business. So selling it was the wisest thing to do in my...

Has anyone tried chaining different spring reverb tanks in series with some of these spring reverb modules? Does this give different results?

I'm intrigued! Looks like a nice companion for the 4ms Spectral multiband resonator, too.

It's been on their website for well over 6 months now, I think. Demos were close to none back then, up untill recently. There's been a demonstration/showcase a week ago of some of instruo's modules that's posted on divkids YouTube channel, including some coverage of this filter. It sounds & look...

Would you by chance have a part number for a USB cable that works? Thanks, I can't help you with that, I'm afraid. I had to test every cable I had laying around. From usb-cables from a credit-card reader to one that came with a wireless bluetooth speaker, none worked. What did end up doing the tric...

I have a META DIY kit from Modular Addict on the way. Looking forward to exploring all the things it can do. I plan to write up my build on pugix.com. I built one a while ago. Very smooth build. Went pretty quick as well Only potential caveat here is getting the right USB cable that isn't just powe...

I'm curious: how is the feel/resistance of the slider? It's OK, if you don't attach the extra black mounting screws to the slider from the front panel, or at least very loosely. The sliders from the Thonk kit have these plastic anti dust covers. When you slide the poti, the covers bend outwards tow...

guessing from the looks of it, it's some sort of mix between clouds and morphagene/nebulae?

Looks like they're expanding their line of modules! ( -> )
That delay is looking great

If i'm understanding the voice allocating possibilities correctly: -Over the midi In/thru jack, each of the 16 voices can be played independantly via midi. -And with the expander attached, you have 5 V/oct inputs adressable over CV. so you could make any possible division of the 16 voices, over thos...

Intellijel Quadra + expander is nearly always included in every patch of mine, some way or another. (often with cewjman DMF-2 lately) :miley: I'm curious about the new version which is in the pipeline, but it doesn't really add much new useful features to it, if I understood well (other than being d...

I was told they are hoping to have model 16 ready for shipment by this summer. That's all I got...

Relevant for those of you who have a voucher: I asked how long the vouchers would be valid. They said 3 months first, then corrected themselves in a new e-mail saying the vouchers would be vaild all the way throughout 2019. So hopefully Model 16 will be back available by then (that part wasn't answe...

I noticed DIY kits of the module are available at Thonk. Is there any SMT involved for us builders?
Looking forward to some demos as well